Alloy 20 Round bar
Jayveer Overseas is one of the leading manufacturer and exporter of Alloy 20 Round Bar in Mumbai, India. We offer best quality and different grades of Round Bar at best price. Austenitic stainless steel, which is what alloy 20 is, is resistant to oxidation and corrosion. Chromium, copper, nickel, and molybdenum are the major constituents of the round bar. Other elements are in minor quantities, including copper, manganese, phosphorus, sulfur, and silicon. Sulfuric acid is frequently used in various industries to process raw materials. So, this round bar grade is a common denominator for the petrochemical, power generation, chemical, and plastics sectors.
Alloy 20 Hex Bar, ASME B473 20 Rectangular Bar, H2, ASME B473 Alloy 20 Cold Drawn Bar, AFNOR Z2NCUD31-20AZ Peeled Round Bar, EN NiCr20CuMo Square Bar, UNS N08020 Threaded Bar, ASTM B473 Type Alloy 20 Bright Bar, DIN 2.4660 Black Bar.
While the Alloy 20 bars rival stainless steel grade 316 in terms of resistance to corrosion from pitting and chloride ions, it has a higher resistance than grade 304. According to the specification, the raw material used to create the Rod must adhere to certain specifications. Alloy 20 Round bars are recommended for common industrial applications due to their many advantageous qualities. These bars can be used to reach difficult-to-reach places.
The UNS N08020 Round Bar is exceptionally strong. The density of an Alloy 200 Round Bar is 8.1 g/cm3. They have good workability and may be extended by 30%. The outer diameter of these round bars ranges between 3mm to 20mm. The material is produced in annealed and hardened conditions. The round bar has various physical properties like Tensile strength and yield strength. The value of these characteristics is 551 Mpa and 251 Mpa, respectively. Other properties include a melting point with a value of 1443 degrees Celsius. In its elemental state, or when combined with other metals and substances, the nickel alloy 20-round bar has significantly improved our modern civilization. This round bar is specially designed with its reactions with sulfuric acid as they strongly resist them. The thickness and width of these round bars vary from 2mm to 100mm and 10mm to 500mm, respectively. The addition of niobium helps to stabilize against sensitization. The technique used in manufacturing these round bars is hot rolled and cold rolled. They were designed with exceptional mechanical properties and tolerances. Alloy 20 was developed for use in the sulfuric acid engineering field. These pipes can be used to reach difficult-to-reach places. Corrosion resistance against solid sulfuric acid is one of the properties. Additionally, it has outstanding mechanical and fabricability properties. Work in the chemical, petrochemical, pharmaceutical, offshore oil drilling, electricity, pulp & paper, and house construction sectors are some examples of related industries.
EN NiCr20CuMo Triangle Bar Stockist, ASTM B473 Alloy 20 Hot Rolled Bar Stockist, Werkstoff Nr. 2.4660 Deformed Bar Supplier, WRN 2.4660 Polished Bar Manufacturer, AFNOR Z2NCUD31-20AZ Peeled Round Bar Supplier, UNS N08020 Hexagonal Bar Exporter, UNS N08020 Half Round Bar Supplier, Alloy 20 Flat Bar Exporter.
Specification:- Alloy 20 Round bar
| Specifications | ASTM B473 , ASME SB473 |
| Dimensions | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Round Bars | Outside Diameter in the range of 4mm to 500mm |
| Bright Bars | Outside Diameter in the range of 4mm to 100mm |
| Hex Bars | 18mm – 57mm (11/16″ to 2-3/4″) |
| Square Bars | 18mm – 47mm (11/16″ to 1-3/4″) |
| Flat Bars | 1/2” to 10” in thickness range of 2mm to 150mm, |
| Finish | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Length | 1 to 6 Meters, Custom Cut Lengths |
| Form | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
Equivalent Grade :- Alloy 20 Round bar
| STANDARD | UNS | WNR. | EN | AFNOR |
| Alloy 20 | N08020 | 2.4660 | NiCr20CuMo | Z2NCUD31-20AZ |
Chemical Composition :- Alloy 20 Round bar
| Grade | C | Mn | Si | S | Cu | Ni | Cr | Fe | Mo | P |
| Alloy 20 | 0.07 max | 2.00 max | 1.00 max | 0.035 max | 3.00 – 4.00 | 32.00 – 38.00 | 19.00 – 21.00 | 29.85 min* | 2.00 – 3.00 | 0.045 max |
Mechanical Properties :- Alloy 20 Round bar
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Alloy 20 | 8.1 g/cm3 | 1443 °C (2430 °F) | Psi -80,000, MPa -551 | Psi - 35,000, MPa - 241 | 30 % |
Dimensions :- Alloy 20 Round bar
| Diameter or Width (mm) | Weight per meter | Sectional Area | Perimeter | |||
| Square (kg) | Round (kg) | Square (cm²) | Round (cm²) | Square (cm) | Round (cm) | |
| 5.0 | 0.20 | 0.15 | 0.25 | 0.20 | 2.0 | 1.57 |
| 5.5 | 0.24 | 0.19 | 0.30 | 0.24 | 2.2 | 1.78 |
| 6.0 | 0.28 | 0.22 | 0.36 | 0.28 | 2.4 | 1.88 |
| 7.0 | 0.38 | 0.30 | 0.49 | 0.38 | 2.8 | 2.20 |
| 8.0 | 0.50 | 0.39 | 0.64 | 0.50 | 3.2 | 2.51 |
| 9.0 | 0.64 | 0.50 | 0.81 | 0.64 | 3.6 | 2.83 |
| 10 | 0.73 | 0.63 | 1.00 | 0.79 | 4.0 | 3.14 |
| 11 | 0.95 | 0.75 | 1.21 | 0.95 | 4.4 | 3.46 |
| 12 | 1.13 | 0.89 | 1.44 | 1.13 | 4.8 | 3.77 |
| 14 | 1.54 | 1.21 | 1.96 | 1.54 | 5.6 | 4.40 |
| 16 | 2.01 | 1.58 | 2.56 | 2.01 | 6.4 | 5.03 |
| 18 | 2.54 | 2.00 | 3.24 | 2.54 | 7.2 | 5.65 |
| 20 | 3.14 | 2.47 | 4.00 | 3.14 | 8.0 | 6.28 |
| 22 | 3.80 | 2.98 | 4.84 | 3.80 | 8.8 | 6.91 |
| 25 | 4.91 | 3.85 | 6.25 | 4.91 | 10.0 | 7.85 |
| 28 | 6.15 | 4.83 | 7.84 | 6.16 | 11.2 | 8.80 |
| 32 | 8.04 | 6.31 | 10.24 | 8.04 | 12.8 | 10.05 |
| 36 | 10.17 | 7.99 | 12.96 | 10.18 | 14.4 | 11.31 |
| 40 | 12.56 | 9.86 | 16.00 | 12.57 | 16.0 | 12.57 |
| 45 | 15.90 | 12.49 | 20.25 | 15.90 | 18.0 | 14.14 |
| 50 | 19.62 | 15.41 | 25.00 | 19.64 | 20.0 | 15.71 |
| 56 | 24.62 | 19.34 | 31.36 | 24.63 | 22.4 | 17.59 |
| 63 | 31.16 | 24.47 | 36.69 | 31.17 | 25.2 | 19.79 |
| 71 | 39.57 | 31.08 | 50.41 | 39.59 | 28.4 | 22.31 |
| 80 | 50.24 | 39.46 | 64.00 | 50.27 | 32.0 | 25.13 |
Types :- Alloy 20 Round bar
ASTM B473 Type Alloy 20 Bright Bar
Alloy 20 Hex Bar
ASME B473 20 Rectangular Bar
EN NiCr20CuMo Square Bar
UNS N08020 Threaded Bar
DIN 2.4660 Black Bar
ASME B473 Alloy 20 Cold Drawn Bar
AFNOR Z2NCUD31-20AZ Peeled Round Bar
Alloy 20 Flat Bar
weight chart :- Alloy 20 Round bar
| Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr | Size | Kgs / Foot | Kgs / Mtr |
| 3mm | 0.017 | 0.055 | 20mm | 0.753 | 2.470 | 3" | 10.900 | 35.762 |
| 1/8" | 0.019 | 0.062 | 22mm | 0.908 | 2.979 | 3-1/4" | 12.800 | 41.996 |
| 5/32" | 0.029 | 0.095 | 7/8" | 0.926 | 3.038 | 3-1/2" | 14.850 | 48.772 |
| 4mm | 0.030 | 0.098 | 24mm | 1.080 | 3.543 | 3-3/4" | 17.001 | 55.780 |
| 3/16" | 0.043 | 0.141 | 25mm | 1.180 | 3.871 | 4" | 19.306 | 63.340 |
| 5mm | 0.047 | 0.154 | 1" | 1.210 | 3.970 | 4-1/4" | 21.908 | 72.249 |
| 7/32" | 0.058 | 0.190 | 26mm | 1.271 | 4.170 | 4-1/2" | 24.4487 | 80.340 |
| 6mm | 0.068 | 0.223 | 27mm | 1.368 | 4.490 | 4-3/4" | 27.366 | 90.249 |
| 1/4" | 0.076 | 0.249 | 1-1/8" | 1.534 | 5.033 | 5" | 30.461 | 99.940 |
| 7mm | 0.091 | 0.298 | 30mm | 1.691 | 5.548 | 5-1/2" | 36.690 | 121.000 |
| 5/16" | 0.118 | 0.387 | 1-1/4" | 1.924 | 6.349 | 6" | 43.860 | 143.900 |
| 8mm | 0.120 | 0.398 | 32mm | 1.894 | 6.314 | 6-1/2" | 51.093 | 167.630 |
| 9mm | 0.152 | 0.498 | 1-3/8" | 2.303 | 7.550 | 7" | 59.432 | 196.000 |
| 3/8" | 0.170 | 0.557 | 35mm | 2.390 | 7.553 | 7-1/2" | 68.226 | 225.000 |
| 10mm | 0.189 | 0.620 | 36mm | 2.438 | 7.999 | 8" | 77.586 | 254.55 |
| 11mm | 0.228 | 0.748 | 38mm | 2.792 | 8.903 | 10" | 121.048 | 397.140 |
| 7/16" | 0.232 | 0.761 | 1-1/2" | 2.715 | 8.951 | |||
| 12mm | 0.271 | 0.889 | 40mm | 3.009 | 9.872 | |||
| 1/2" | 0.303 | 0.994 | 1-5/8" | 3.200 | 10.449 | |||
| 13mm | 0.318 | 1.043 | 1-3/4" | 3.712 | 12.179 | |||
| 14mm | 0.368 | 1.207 | 45mm | 3.807 | 12.555 | |||
| 9/16" | 0.383 | 1.256 | 1-7/8" | 4.260 | 13.977 | |||
| 15mm | 0.424 | 1.391 | 48mm | 4.330 | 14.205 | |||
| 5/8" | 0.473 | 1.551 | 50mm | 4.698 | 15.414 | |||
| 16mm | 0.481 | 1.578 | 2" | 4.848 | 15.906 | |||
| 17mm | 0.543 | 1.791 | 2-1/8" | 5.475 | 17.963 | |||
| 11/16" | 0.573 | 1.880 | 2-1/4" | 6.135 | 20.128 | |||
| 18mm | 0.610 | 2.001 | 60mm | 6.768 | 22.205 | |||
| 3/4" | 0.682 | 2.237 | 2-3/8" | 6.838 | 22.435 | |||
| 2-1/2" | 7.576 | 24.856 | ||||||
| 2-5/8" | 8.354 | 27.409 | ||||||
| 2-3/4" | 9.169 | 30.083 |
available stocks :- Alloy 20 Round bar
UNS N08020 Hexagonal Bar
WRN 2.4660 Polished Bar
ASTM B473 Alloy 20 Hot Rolled Bar
EN NiCr20CuMo Triangle Bar
UNS N08020 Half Round Bar
Werkstoff Nr. 2.4660 Deformed Bar
Price List :- Alloy 20 Round bar
| Round Bars | US $1000-2500 / Ton |
| Square Bars | US $1000-2500 / Ton |
| Flat Bars | US $1.5-4.5 / Kilogram |
| Threaded Bars | US $1800-2300 / Ton |
| Hollow Bars | US $1550-2400 / Ton |
| Hexagonal Bars | US $1800-2300 / Ton |
| Triangular Bars | US $1300-2600 / Metric Ton |
industries we serve :
- Biodiesel and ethanol plants and tanks
- Palm oil and wine storage tanks
- Bridges, flood gates, and sluice gates
- Washers and paper machine parts
- Pulp and paper mill equipment
- Mixers and agitators
- Architectural applications
- Waste water handling systems
- Ethanol production components
- Desalination system chambers and evaporators
- External absorber and outlet duct reinforcements
- Chemical process pressure vessels, piping and heat exchangers
- Pressure vessels, heat exchangers, tanks, piping systems and tankers
- Hydrogen peroxide bleaching reactors, digesters, and white liquor storage tanks
Packaging Used by us :
We ship our stainless steel metal products in industry leading packaging designed to ensure your order reaches its destination safely. We offer multiple packaging options to meet your specific requirements. Packing is quite important especially in a case of international shipments in which consignment pass through various channels to reach the ultimate destination, so we put special concern regarding packaging. We pack our goods in numerous ways based on the products. We pack our products in multiple ways, such as,
- Shrink-wrapped
- Carton boxes
- Wooden pallets
- Wooden boxes
- Wooden crates
Quality and tests Done by us :
- Positive material recognition
- Mechanical examining like tensile, Elongation and reduction of area.
- Large-scale test
- Chemical examination-Spectro analysis
- Firmness test
- Pitting protection test
- Hydrogen-effected cracking test approved by NACE TM0284
- Small tests
- X-ray test
- Impact analysis
- Eddy current examining
- Hydrostatic analysis
- Prompt test
- Sulfide stress corrosion test approved by NACE TM 0177
- Curve test
